Calpeda IDROMAT Electronic regulator for pumps
IDROMAT Electronic regulator for pumps
Construction:
Regulation device equipped with flow and pressure sensor connected to an electronic system.
Inlet and delivery connection ports of the same diameter (G1).
Built-in check valve.
Pressure gauge 0-10 bar for IDROMAT 2.
Applications
Automatic control of pumps for water supply and increase of network pressure.
Control of Starting/Stopping of the pump when utilization points are opened/closed.
For Protection of the pump:
-against dry running;
-against the risk of operation without water at the inlet (caused by a lack of water inflow in the inlet pipe under positive suction head,
by a non-immersed suction pipe, by excessive suction lift or by air entering the suction pipe);
-against operation with closed connection ports.
Operating conditions
TYPE | Switching-on pressure | Pump head |
IDROMAT 12 | 1,2 bar | > 20 M |
IDROMAT 15 (standard) | 1,5 bar | > 23 m |
IDROMAT 22 | 2,2 bar | > 30 m |
IDROMAT 30 | 3,0 bar | > 40 m |
IDROMAT 2-12 | 1,2 bar | > 17 m |
IDROMAT 2-15 (standard) | 1,5 bar | > 20 m |
For pumps with delivery up to 10 m³/h.
Maximum working pressure: 10 bar.
Liquid temperature up to 60 °C.
Mains Voltage: 220 V - 250 V, single-phase.
Frequency: 50 - 60 Hz.
Protection IP 55 (IP 65 for IDROMAT 2).
Current Values: 25A max at start-up;
10A during operation.