Calpeda MXS Multi-Stage Submersible Clean Water Pumps

Calpeda MXS Multi-Stage Submersible Clean Water Pumps
MXS Multi-Stage Clean Water Pumps

MXS Multi-Stage Submersible Clean Water Pumps Construction
Close coupled multi-stage submersible pumps in chrome-nickel stainless steel.

Hydraulic part under the motor and motor cooled by the pumped water for safe operation also with the pump only partially immersed. Double shaft seal with interposed oil chamber. The suction strainer prevents the entrance of solids with diameter
bigger than:  - 2,5 mm for MXS 203,4,5,6 - 404,5 - 803,4                                                                                                                       - 2 mm for MXS 207,8,9,10 - 406,7,8,9,10 - 805,6,7,8,9.

Applications
For water supply from wells, tanks or reservoirs.
For domestic use, for civil and industrial applications, for garden use and irrigation. Utilization of rain water.

Operating conditions
Water temperature up to 35 °C.
Minimum internal diameter of well: 132 mm.
Minimum immersion depth: 100 mm.
Maximum immersion depth: 20 m (with suitable cable length). Continuous duty.

Motor
2-pole induction motor, 50 Hz. MXS : three-phase 230 V ± 10%; three-phase 400 V ± 10%.
MXSM : single-phase 230 V ± 10%, with thermal protector uo to 1,1 kW.
           Control box with capacitor (and thermal device for 1,5 KW).
           Float switch (on demand)
Cable: HO7RN8-F, 4 G 1 mm2, length 15 m. Insulation class F.
Protection IP 68 (for continuous immersion).
Double impregnation humidity-proof dry winding.
Constructed in accordance with EN 60335-2-41.

Special features on request
- Other voltages.
- Frequency 60 Hz (as per 60 Hz data sheet). - Cable length 20 m.

Download Calpeda MXS Multi-Stage Submersible Clean Water Pumps Catalogue