Calpeda GM10 Submersible Drainage Pump

Calpeda GM10 Submersible Drainage Pump
Calpeda GM10 Pump

Submersible drainage pump constructed with composite poly-mers developed especially for this product.

Construction

Submersible drainage pump constructed with composite poly-mers developed especially for this product.
These new rustproof materials are resistant to corrosion, indeformable at maximum temperature differentials in the pump and motor and resistant to internal and external strain. Shaft of chrome steel AISI 430. Three lip seals in NBR.
Minimum dimension and high levels of performance, for use in many different applications, for flow rates up to 200 liters/min. With float switch for automatic start/stop.

Applications

For clean or slightly dirty water.
For draining flooded rooms or tanks.
Extraction of water from ponds, flowing water or pits for col-lection of rain water. For irrigation purposes.
For use outdoor, the power supply cable shall have a length not less than 10 m.

Operating conditions

Maximum liquid temperature for prolonged use: 30 °C (with immersed motor).
Immersion depth: 5 m max (with suitable cable length). Not suitable for continuous duty for prolonged time.

Motor

2-pole induction motor, 50 Hz (n = 2900 rpm).
Single-phase 230 V ± 10%, with thermal protector.
Capacitor inserted in the housing incorporated in the plug.
Cable: with plug, length 5 m, 2451EC57 4 G 0,75 mm2, according to EN 60335-2-41 for pumps up to 5 kg.
Insulation class B.
Protection IP 68.
Triple impregnation humidity-proof dry winding.

Special features on request

Other voltages.
Frequency 60 Hz (as per 60 Hz data sheet).
Cable HO7RN8-F, 4 G 1 mm2, length 10 m, without plug. Control box with capacitor, for pumps with cable without plug. Without float switch.
With elbow on discharge port.

Download Calpeda GM10 Submersible Drainage Pump catalogue